Make Appointment

Cotton Wall Coat on Every Surface

You can apply Cotton Wall Coat on any surface as plaster, cement, paint, ceramic, tile, Cotton Wall Coat, glass, plastic, etc. However, there is emphasis when applying to each facial. Here we have compiled recommendations, tips, and hints to help you get the best performance from Belka.

Drywall

Cotton Wall Coat application on a drywall surface is easy. Under normal circumstances, you must use paste. Plus, you also have to sand the wall beforehand. But with Cotton Wall Coat, all these efforts are not necessary. If the drywall is proper, you can directly apply Cotton Wall Coat. But the ungalvanized screws can oxidize in contact with water. To prevent this, you can paint or putty to screws.

Plaster

In the case of applying Belka to the plaster, we recommend using a primer. Plaster absorbs water and dries quickly. It may mix with some Cotton Wall Coat colors and lighten the color of Cotton Wall Coat. To prevent such a situation, we recommend applying a waterproof primer.

Cement

Under normal conditions, people apply three coats of plaster to the cement. However, there is no need to use the last layer of plaster in an area where Belka is applied. You can apply Belka as the third layer of plaster.

Tiles

You can apply Cotton Wall Coat without preliminary preparation on grout. For the best performance, you have to apply Cotton Wall Coat directly to the surface. We don’t recommend the application if there is dust on the grout because this powder may reduce the efficiency of Cotton Wall Coat. For this reason, you should better apply Cotton Wall Coat to the grout after cleaning the dust with a dump cloth. Then you can have a better result and performance from Cotton Wall Coat.

Concrete Blocks

You can apply Cotton Wall Coat on properly installed aerated concrete without any product between them.

Stone Surfaces

You can easily apply Cotton Wall Coat on stone surfaces (ceramic, tile, etc.). For the indented stone surfaces, the depth matters. You can apply Cotton Wall Coat directly for a deepness of around 1-2 cm. If the depth is high, we suggest using Cotton Wall Coat with less water in the hollow areas. This way, your design will look smoother, and the efficiency of Cotton Wall Coat will be higher.

Metal

Some metal surfaces may react with water. To measure whether the metal on which you will apply. Cotton Wall Coat reacts with water, you can water the surface and wait for 1 to 2 hours. If a reaction occurs, we recommend using a waterproof primer. If not, you can apply Cotton Wall Coat after cleaning the dirt and rust.

Plastic Paint / Latex Paint / Water Base Paint

You can apply Cotton Wall Coat to plastic-containing paint. However, if the quality of the plastic painting is not good, we suggest using a waterproof primer before application. Thus, you can obtain a higher efficiency from Cotton Wall Coat.

Glass

The surface must be clean when applying on glass. If there is dust and oil, we recommend cleaning the facial first (You may use a dishwashing detergent and a sponge for the cleaning). If you apply. Cotton Wall Coat on well-cleaned glass surfaces, you will ensure that it will remain intact for many years. You will get high efficiency from Belka.

Wallpaper

You can easily apply Cotton Wall Coat on wallpaper. The ease of application depends on the quality of the wallpaper. Cotton Wall Coat adheres firmly to all surfaces. If the wallpaper is not solid enough, it may separate from the wall during application. You can apply a test to your wallpaper to prevent this. Wet your wallpaper a little and leave it for a while. If the wallpaper does not separate from the surface, it is sound. You can apply Cotton Wall Coat to it. However, if the wallpaper separates from the surface when pulled, we recommend you remove it first and then install Cotton Wall Coat.

Wood

We recommend applying a waterproof primer on products made of wood. You can use one layer of primer horizontally and one layer vertically. For this cross-application, you can get a durable primer. Then, you obtain higher performance from Cotton Wall Coat.

Belka

You can apply as many Cotton Wall Coat as you wish to Cotton Wall Coat. Thus, the efficiency you will get from Cotton Wall Coat increases. You will increase Cotton Wall Coat’s heat insulation, sound insulation, fire resistance, durability, and many other great features.